Compressible Filler Boards for expansion joints

Compliance with International Standards and also with M.O.S.T. Specifications, AAI & MES

Specifications :
Versatile application in roads , runways, buildings, bridges , structures.

Descriptions :
This is a microcellular, closed cell, PE foam Board being manufactured in various grades, size & shapes to meet various requirements of construction industry.

Technical Compliance :
Meets Specification of Highway works As per Vol : I-clause 1015 B.S. 5628 / B.S. Specification clause No. 2630 and (M.O.S.T.) IS 1838*

Advantages :
1) Fuel / Solvent / Water / Good Weather Resistant.
2) Excellent movement accommodations.
3) Negligible water absorption & long life.

Uses :
As a filler material in expansion joints & movement joints of Road, Bridges, Buildings, Tunnels, Water Retaining Structure etc.

Technical Data for H-20 / 100-Grade
Density	:	100 ± 10 Kg. / M.³
Tensile strenght	:	12 Kg. / sq.cm.
Elongation	:	110%
Recovery at 50% compression	:	average 97% (As per M.O.S.T. test procedures)
Water absorption	:	0.02% ( negligible)
Temperature range	:	- 40 to 100°C
Fuel / Solvent / Chemical resistance	:	Excellent (Similar to LDPE)
Reaction / adhesion to Sealents	:	Totally innert with all type of sealent.
Weathering conditions	:	Passes Weatherability test.
Compression loading	:	Satisfies B.S. 5628 Code of practice.

Technical Specifications for full range of our product :
Hardness	:	20 ± 5
Density	:	100 ± 10 Kg./ M.³
Width	:	6 mm. to 1000 mm.
Thickness in mm	:	6/10/12/15/18/20/25/30/35/40/45/50
Length	:	1m, 2m, 7.5m, 8.5m, 9.5m
Special sizes can also be manufactured on special orders.

Compliance with International Standards and also with M.O.S.T. Specifications
Versatile application in roads , runways, buildings, bridges , structures

In pursuit of continuous improvement, the technical contents are subject to change without any notice.

<< Back

Next >>